So, you decided to couple your existing WiFi router with an Amped networking range extender due to its immense popularity? But, what happened? Are your facing problems just after completing the Amped wireless extender setup process? Your Amped WiFi extender keeps losing signal? Well, there’s nothing to worry about. There are a few things that you can do in order to make everything normal. What are those things? Let’s talk about them.
Why Amped WiFi Extender Keeps Losing Signal?
Entering the troubleshooting process with Stage 1 i.e. by learning the reasons behind the issue! Well, the very first reason why you are facing WiFi problems with your device is that you’ve kept it at the wrong location. Perhaps, in a WiFi interference zone! In that case, we suggest you assign a new location to your range extender.
With that said, you have to keep it in a well-ventilated zone that is free of WiFi interference. In simple words, your WiFi device must sit in a room that gives no space to devices emanating electromagnetic frequencies, surfaces that reflect, or objects that hold a large amount of water. Corners should also be avoided for the extender’s placement. If not the placement, then the reasons mentioned below might be working behind the Amped WiFi extender keeps losing signal issue:
-
Outdated Firmware
Right after configuring the range extender, the user is advised to assign Amped wireless extender login details to the device. But, along with that, it is also suggested to install the latest firmware version. Possibly, you didn’t pay heed to the same.
-
Improper Extender-Router Distance
Another reason why you are experiencing issues with your wireless range extender is that you have not maintained a safe distance from the main router. Chances are that your devices are either literally hugging each other or have parted ways i.e. they are too far.
Solutions: Amped WiFi Extender Keeps Losing Signal
Now that you’ve become familiar with the reasons causing your WiFi device to lose signals every now and then, the time to start learning how to solve the problem. But, before doing anything else, restart the range extender and ensure that it remains free of glitches while you carry out the troubleshooting procedure. Here’s how you can address the issue in the discussion:
-
Upgrade the Firmware
Access the dashboard of your Amped device and equip it with the latest firmware version as soon as possible. For your information, the firmware is a software of the extender that controls every activity. It needs to be updated timely so that no issue arises while using the WiFi device. It also helps in fixing minor bugs and errors.
-
Keep the Extender-Router Distance Safe
Consider keeping a safe gap between your networking gadgets. Of course, we are talking about your range extender and the router. You have to place them at a safe distance. It means neither too far nor at a zero distance. In the first scenario, devices won’t communicate and in the second case, their signals will clash.
Final Thoughts
With that, it is time to put a full stop to our Amped wireless troubleshooting guide. We are assuming that you not only read the reasons carefully but also implemented the correct hacks to resolve the problem. However, if the problem still shows up, something is wrong with the setup process of the extender. So, reset it and reconfigure it from scratch.
