“Wavlink WiFi extender no internet” issue has started ruining the WiFi usage of tens of millions of users across the globe already. Are you also facing the same issue? Did you nod in yes? Need not to worry! It happens when you haven’t done Wavlink wifi extender setup in a correct manner.
Not only the improper or partial extender setup results in the issue, but also an outdated firmware version can be responsible for it. Look, regular firmware updates are known for boosting up the range extender’s internet range. And, if the firmware is not updated on time, it will surely going to provide you no internet connectivity.
Note: You can’t update the firmware of your Wavlink WiFi extender with no internet. This was supposed to done when you were having sufficient internet range. Now, you have no internet! So, updating the extender’s firmware seems impossible for you. Once the “no internet” issue gets resolved, you can perform Wavlink firmware update. Ensure to update the extender’s firmware timely to prevent this type of inconvenience in future.
Now, you might be thinking about how to fix the issue, right? Think no more and stick to this 5-minute read! Here, you will get the topmost fixes to resolve the issue at hand!
Fixed: Wavlink Extender No Internet
Fix 1: Check the Connection
If there is an unstable connection between your WiFi range extender and router, then also you may face the “no internet” issue. Hence, for fixing the issue and to make the most out of your WiFi range extender, connect it to your router and ensure that the connection is successful.
Moreover, you have to ensure that the Ethernet cable you have used is non-damage. On the other hand, you must insert the cable firmly into the Ethernet ports of your devices.
After applying this fix, check if the “no internet” issue is resolved or not! If it still persists, then apply the next hack in line.
Fix 2: Relocate Your WiFi Range Extender
There is a possibility that you have kept your WiFi range extender inside cabinet or show window. Doing so will affect the WiFi signals of your range extender, resulting in “no internet” issue. Besides, avoid keeping the extender under your computer/ study table or back of your device.
The central and higher location in your home is the best place for your WiFi extender. No matter where you place your extender (as per our recommendation), but you are supposed to keep it in reach of your router always.
Fix 3: Restart Your Wavlink Extender
Due to minor technical glitches, you may face “no internet” issue with your WiFi range extender. To do away with the problem, restarting (power cycling) the extender is recommended.
Here are the instructions to restart your WiFi range extender:
-
First things first, turn off your WiFi extender.
-
Are you done with turning off the device? If yes, then disconnect it from your router.
-
A few moments later, turn on your range extender and reconnect it to the existing device (router) via Ethernet source.
Still getting the same issue? If yes, then it could be due to improper Wavlink WiFi extender setup. To deal with the issue, you need to reset your WiFi extender and then reconfigure it again by following the instructions provided on Wavlink setup page. For this, you have to log in to your Wavlink range extender via default web address.
We hope that the fixes we have listed above help you fix “Wavlink WiFi extender no internet” issue.
