Hot water system is used to supply warm water to everyday tasks like washing dishes, showering, washing hands and washing laundry. Because your family uses your water heater on a regular basis, it’s not uncommon for issues to develop. Luckily, tank-style hot water heaters are constructed using a limited number of components. In reality, you might be able to fix the issue with your hot water heater , without needing to call an expert. In the event that your water heater isn’t functioning, we’ve put together an inventory of common issues and solutions.
Water Heater ProblemsÂ
Loose or Damaged In-Line Valve
A water leak is not as common close to the base of your water tank, water leaks at the one of the tops of the system can be fixed easily. The most common reason for water tank leaks is the in-line valve being loose. It is a handle situated high up in the tank, and it is designed to turn off or activate it to regulate the water’s flow.Â
Damaged Pressure Relief Valve
A majority of water heaters come with an emergency valve for pressure relief that is designed to release the pressure in the tank when it gets excessive. If this valve located on the top of your heater starts leaking, then we suggest buying a replacement online or at a local retailer as you should not think of hot water repairs canberra in this case. The procedure of replacing and removing pressure relief valves isn’t difficult.
No Warm Water
If you own the electric hot water system in your house, then the main reason for a lack of warm water is a damaged heating element. Your water heater is fitted by two heaters which are responsible for heating the incoming water inside the tank. When a heating element starts to fail, you’ll not have hot water for cleaning, showering and washing.
Low Supply of Hot Water
Are you always finding yourself running out of warm water? This could result from cracks in your dip tube. A lack of warm water could be an indication of excessive build-up of sediment inside your tank. When your water heater is midway through its cycle, water-based minerals like calcium and magnesium begin to build up on the bottom of the tank. As the mineral content continues to increase in size, the water tank will have less space in the tank to keep hot water. To solve this issue you can the water heater should be flushed in order to get rid of the minerals that are accumulating.
Water is Too Warm or Cold
If the shower water is uncomfortable, cold or hot ,you can alter the temperature of your shower by altering the settings on your thermostat. Setting the temperature at 120 degrees Fahrenheit could aid in saving the cost of your energy bill. It’s a good temperature to set in case you’re concerned about scalding and skin irritation. Do you feel that this temperature is too cold? You can also set the thermostat to 140 degrees Fahrenheit in order to ensure that your showers are more enjoyable. When your water heater isn’t operating when you adjust the temperature, it’s an indication of a damaged thermostat. Find a licensed heating or plumbing heating professional nearby to fix or replace the thermostat.
Low Water Pressure
A low water pressure is not necessarily caused by an issue with the water heater. If you reside in an older house that has smaller pipes and a smaller flow of water is impeded before it reaches the bathroom or kitchen skins. The only solution to get rid of this hot water heater issue is to install new 3/4-inch plumbing lines into your systems. Another issue that could negatively affect the water pressure is calcium deposits in the water pipes.
Discoloured Water
The water from the kitchen sink must be clean. Are you seeing water that is discoloured in your home? It’s a sign of decay in your water tank or the rod that is the anode of your heater. Fortunately, the problem can be resolved when it is discovered at an early stage. When the water heater within your home isn’t functioning properly, contact a plumbing professional within your neighbourhood to fix the problem or perform tune-ups.
Conclusion
For assistance for a gas hot water system valve that is malfunctioning, damaged or heating element that is broken or a cracked dip tube, call professionals to make an appointment. Professional plumbers will resolve all the above mentioned issues, and will save you a lot of time and money.
