TYRE MAINTENANCE AND ITS IMPORTANCE

Cars and vehicles are an everyday staple. A piece of complex machinery, the car, has worked its way into our lives to the point where we are not just accustomed to its benefits but conditioned to use it almost always. Though vehicles are very important for our everyday life, it is impossible to jot down everything about it, including the Tyre Fitting Birmingham. 

As a layman, one does not need any special reason to get acquainted with the workings of the car. However, as a responsible owner who does not want to suffer the consequence of ignorance, one must always understand and know the functions of a car. After understanding the basics of your vehicle, you would be easily able to point out the areas which require replacement, repair or even maintenance. 

Even when you think your vehicle is operating smoothly, you should still scrutinise it for timely maintenance. This ensures that the performance of your vehicle is enhanced and no long term damages get incurred. Tyres are just the same. They have to be maintained regularly so that no long and major costs are added up. 

The most common signs of bad maintenance are punctures and blowouts. These two conditions simply lead to a replacement and tyre fitting. To avoid unnecessary replacements and changes, maintenance is necessary. Tyres are not cheap pieces of equipment. Therefore, maintaining them will only help the driver in the long run. 

There are several aspects of tyre maintenance. Some of them can be listed as: 

MAINTAINING OPTIMAL INFLATION PRESSURE: 

Tyres are not just circular objects that runs whenever you want them to. They are a component of complex machinery that works on certain set conditions. If your tyres do not have enough inflation pressure within them, they will not function properly. On the contrary, if the pressure within your tyres is too much, they will display signs of problem then too. 

When the pressure within your tyres is too little, it is called underinflation. Underinflation is the number one reason for punctures and blowouts. This is because the tyres easily lose their integrity and start deforming and it becomes easier for sharp objects such as nails and pins to penetrate them. Punctures can leave you stranded on the side of the road, which is far from ideal. 

Overinflation happens when the pressure within your tyres is over the needed limit. When your tyres are over-inflated, they run a risk of impact damage. When tyres are driven at high speeds with overinflated tyres, the distance between the road and the tyres can increase which is also dangerous. Therefore, it is important to maintain optimal pressure. 

The minimum level of pressure that all drivers must maintain is mentioned on the owner’s manual as provided by the tyre manufacturer. This manual should always be used to check the pressure of your tyres. 

MAINTAINING THE TREAD OF THE TYRES: 

All brand new tyres have a tyre tread depth of about 8mm. The tread of a tyre is different according to its deliverables. For example, the tread of a winter tyre will have a lot of sipes but the same would not be the case for summer tyres. All-season tyres, on the other hand, will have a tread that can function uniformly through dry and wet conditions. The tread of any tyre determines the quality of the performance. These factors highlight its importance. 

Additionally, it is only the tread that comes in contact with the road. 

As time passes by, the tread of the tyre starts to wear down. If your vehicle is not used often, this process would be slower. However, the wearing of the tyres is an inevitable thing that happens for all tyres. There is no way to prevent this from happening. However, uneven tyre tread wear is a common sight noticed amidst most tyres. This happens because the tyres on the front axle come in contact with the road first so more impact is generated on them. 

To slow down or prevent uneven tread wear from reducing the lifespan of your tyres, tyre rotation is done. Tyre rotation is a common process that should be employed every time your vehicle has been driven for more than 12,000km. By following a few steps, one can shift the tyres from their front axle to the wheels on the rear axle. 

It is important to take note of the tread wear indicators. If your tread has worn off a lot, some Tyres Birmingham will display TWI, which indicates that your tyres need to be changed as the tyre tread has worn off beyond its limit. 

These are some aspects of tyre maintenance.