If you’re considering printing t-shirts for a project you’re considering, one of the options you’ll be presented with is to explore your options. This article explains DIY options and how to create a custom shirt with a shirt printer.
One of the most important considerations is what color of T-shirt are you using to print the shirt? There are no big issues with printing a white T-shirt.
However, if you are making a custom
Printed shirt with a light colored shirt, remember that your printer does not have white ink, so if you have a photo of three people in a white shirt, there will be clouds blanks inside. In heaven, every white part of the image will be the same color as the shirt. If you have a light blue t-shirt, the people, clouds, and t-shirt in your photos will be light blue.
Another factor to consider when printing light colored shirts is that your printer’s ink will mix slightly with the color of the shirt. In the past I have printed light blue ink on light yellow T-shirts. This place has gone green. It’s like when we were kids and we took yellow with a red pencil to make it orange. This only happens with light print colors on light t-shirts. Shade is usually not important, but it is worth considering. Darker ink colors are not a problem.
The t-shirt transfer paper you purchased
is designed for printing on white or light-colored t-shirts. If you want to print on a black or darker shirt, you need shirt paper that is specially designed for printing dark colors.
You can print transfers with a laser or inkjet printer. However, before printing the image, you need to rotate the image so that it looks good when printed. Some programs make this easier because they have a “pane” or “mirror.” In programs like Word, it’s usually a bit more complicated. Make sure you have flipped the image correctly by printing a copy and placing it in front of a mirror. This is how it will appear on your custom shirt.
You need to make sure your printer is set to the correct paper type.
Usually you put it in heavy or carton. Crop this unused image around the perimeter for a better look. For instance; If you have an image of the Earth with the words “Save Our Planet” underneath, cut out the entire print. Shirt transfers often have a yellow color around the print. This is because the coating on the transfer paper adheres to the ink on the t-shirt.
A good t-shirt printer will reduce this surcharge, but more importantly the combination of the printer and the transfer of the shirt mean that when printing the shirt, the unprinted areas are usually transparent and should not pose a problem.
When you are ready to print on the transfer shirt,
When pressing the mangle, be sure to follow the instructions for best results. When I started making t-shirts in the 90s, it took 11 minutes to iron a shirt, and even then almost half of the t-shirts were on paper. Since I wasn’t happy with the results, I bought a heat press. A heat press is a machine specifically designed for printing custom t-shirts. You can choose the temperature you want and press the shirt for the number of seconds you want.
With a heat press, which I and other commercial t-shirt printers use, you can adjust temperature, time, and pressure. Sometimes it gives the perfect touch.
It should be noted that the transfer paper
Used by professional jersey makers must be applied on a commercial heat press. You cannot correct these transfers. In addition to a computer and a printer, you have to create your own printed t-shirts; of course the t-shirts are included. You will probably want to use a pre-shrunk 100% cotton or 50/50 shirt.
You also need shirt transfers. You can buy this specialty paper at places like Office Depot, Staples, Office Max, Michael’s, and craft stores like Wal-Mart. If you use an inkjet printer, make sure you buy inkjet compatible paper and if you have a laser printer. For more information visit our website https://www.shopletsgobrandon.com/
