Paint gives the whole space a new well-improved look. Whether it is a residential or commercial place, the paint looks beautiful. However, because of heavy rainfall, floods and other causes, moisture and humidity increased in the weather. Because of this, many properties in Perth cause water damage.
Over time, that water damage causes paint damage like bubbles, flakes, peels or start stains. If you do not pay attention to the water damage, it can damage the whole building’s appearance. Furthermore, it would not be challenging to restore paint of your space that has gotten damaged due to moisture. If you have no idea how you can restore the paint, you can call painting contractors in Perth.
Anyhow, for your convenience we have shared some tips for restoring the paint after water damage. It can help you in many ways. Whenever you face water damage, you can follow these instructions to repaint the building.
Evaluate the damage
Evaluate how much water damage has happened to your place. It is an important step before you restart the painting project. You can prepare your walls for a sealer so the stains don’t appear through the new paintwork. If your building’s walls have water stains but the surface is still hard to the touch and there are no other signs of damage.
However, you cannot repaint the walls if they are not dry because of that water damage. Moreover, if the building has lost its structural integrity, you still cannot repaint the wall. You may need to contact painting contractors in Perth who are prepared to handle the situation. If the surface is soft or bubbling because of too much moisture present, especially if mold is starting to grow.
Clean the affected area
Remove the bubbling, peeling and flakes of paint from the affected area. Use the scraper or wire brush for removing the old paint. Clean the whole area to make it smooth. This is the important step before you ready your wall for paint. If the area is seriously damaged, you can call professional painters in Perth. Otherwise small areas can be restored by yourself.
Choose the painting tools and materials
To paint a surface, make sure you have an appropriate set of materials and tools to be used. So, here are some tools and materials that you may need for the painting job.
- Bucket
- Try
- Paintbrush
- Paint roller
- Putty knife
- Filler
- Good quality primer
- Good quality paint
- A cloth
Fill and sand the entire affected surface
Put the glove on your hand and apply the filler to the holes and uneven surfaces. After getting the area filled, the next comes sanding. Sanding is the process to make the surface smooth with sandpaper. Do it until the area becomes smooth for the next step. You can ask painting contractors in Perth about what kind of filler you should use for wall damage.
Apply primer and sealer
Apply primer on the whole surface, and make sure the primer you are using is of high quality. Painting contractors in Perth recommend using high-quality primer because only high-quality primates stick to the wall and make the paint appear good on the wall. Therefore, make sure you are using appropriate painting products.
You can either use a spray primer or a brush. It helps a wall finish lasting for years. Moreover, It helps in sealing the surface’s porous parts to stop water infiltration and guard against potential water deterioration.
Now, paint the surface
Now the whole surface is primed and sealed, it’s time to paint the whole surface. The painting process will be smooth if you have done the sealing properly. Make sure you have selected the right paint for your wall. If you have no idea which paint would be appropriate for your walls, take assistance from painting contractors in Perth.
Professional painting contractors are aware of the complexities of surface preparation for paints and various products. Moreover, they know about the requirements for a paint job, precise application techniques, and safety precautions for handling compromised or damaged building materials.
If you are doing it by yourself, use a paint roller or paint brush for painting the surface. If you are using a paint roller, apply it in a “W” shape to avoid paint stains on the surface. Let it dry to get the best results.
Read More: The Best Commercial Painting Tips for a Perfect Finish
