The Roomba vacuum is a renowned robot vacuum known for the cleaning the vacuum provides. This vacuum has automatic navigation that makes it easy to maneuver itself around. You can use the Roomba vacuum on hard as well as soft surfaces. To start using your Roomba vacuum, you must connect the vacuum to the WiFi. But, if the Roomba not connecting to WiFi, it can get difficult to use the Roomba to the best of its ability. Thus, you must fix the issues with the vacuum to ensure its proper functioning.
It’s crucial to fix the Roomba not connecting to WiFi, to make the most of the vacuum. This issue could arise due to several reasons. Before you proceed with the troubleshooting methods, you must ensure you have connected the vacuum to the WiFi. you just need to proceed with the Roomba login and then you can connect properly. If the issue persists, don’t worry. Keep reading ahead to figure out the issue along with the troubleshooting methods.
Why is the Roomba Not Connecting to WiFi?
To proceed with the troubleshooting methods for the Roomba, you must know the causes too. With the reasons for the issue, you can eliminate the issue easily. Some common reasons for the issue are as follows:
- Incorrect password
- WiFi interferences
- Improper power source
- Low battery
- Internal issues with the router
- Technical issues with the vacuum
From these factors, you can figure out the most relatable one to you. Now, we will discuss the techniques to fix the issue.
Troubleshooting the Roomba Not Connecting to WiFi
When you are aware of the factors responsible for the vacuum not connecting to the WiFi, you can eliminate them efficiently. There are several procedures you can try to fix the issue. Some convenient methods are as follows:
Plug In the Router
- The router should have a proper power source to function effectively.
- This could be a serious reason for the Roomba not connecting to WiFi.
- Thus, you must provide the router with a stable power supply.
- If the current electrical outlet of the router isn’t working, you must plug it into another.
Charge the Vacuum
- The low battery of the Roomba is also a serious cause of the connectivity issue.
- That’s why before you proceed with the Roomba vacuum setup, you must charge it.
- If the vacuum doesn’t have a sufficient charge, you cannot connect it to the WiFi.
- That’s why you must charge the vacuum before you set up the Roomba vacuum.
- To send the vacuum to the charging, you just need to press the Dock button.
Inspect your Router
- There could be issues within the router as well causing the connectivity issues.
- That’s why you must troubleshoot the router properly to fix the connectivity problem.
- To fix the router, you can restart, firmware update, or reset it to eliminate any issues.
- After fixing the issues with the router, you can reconnect the vacuum to the WiFi.
- This should fix the Roomba not connecting to WiFi issue.
Remove the WiFi Interferences
- Sometimes, due to poor WiFi signal as well, you could have trouble connecting.
- A common reason for a WiFi signal is the number of interferences around the router.
- Several objects could interfere with the network. For example, mirrors, cordless phones, walls, ovens, aquariums, and other radio-wave emitting devices.
- These objects cause interference with the router’s signal.
- If these objects are around the router, you must relocate the router.
- The ideal location of the router is in an open area in the middle.
Relocate the Router
- The distance between the vacuum and the router can cause issues with the router.
- Thus, you must place the dock and the vacuum near the router while setting it up.
- You must ensure the room, the vacuum is in, receives good network coverage.
- If the router is too far, you must move the vacuum closer to the router.
- You can also move the vacuum closer to the router for a seamless connection.
- This should fix the Roomba not connecting to WiFi issue.
Use the Correct WiFi Password
- You could also have trouble connecting the vacuum using the incorrect WiFi password.
- Thus, ensure to use the correct password only while setting up the vacuum.
- You should know the correct WiFi password to connect the vacuum to the WiFi.
- Another case could be, you have recently changed the WiFi password.
- In this situation, you must connect the vacuum to the WiFi using the latest password.
Reset the Vacuum
- If none of these methods are working, you must reset the vacuum.
- Resetting the vacuum will fix all glitches and bugs with the vacuum.
- All you need do is press the Dock, Spot Clean, and Clean buttons at the same time.
- When the vacuum makes a beep sound, you can release the vacuum.
- The reset is successful and all the factory default settings are back.
These are some troubleshooting methods you can use to fix the Roomba not connecting to WiFI. If you had to reset the vacuum, you can proceed with the Roomba login again and set it up. If there’s any other issue you are having with your vacuum, you can connect with us.
Website:https://ibusinessday.com/