6 Factors to consider when selecting a flow control valve

0
345
flow control valves- 6 Factors to consider when selecting a flow control valve

When it comes to accurate flow control and management, the contribution of flow control valves is enormous. These tools regulate the flow of fluids and gases by receiving signals from other devices such as flow meters. These devices are significantly used by small and large industries that are involved with direct or indirect manufacturing. In simple terms, a flow controlling valve can control the unwanted flow of water and air in a pneumatic system. However, the application of these devices is beneficial. But, sometimes, it becomes devastating to choose the right valve. This ultimate guide will let you know the factors to determine the best flow control valve.

Match the right size and type

Well, the use of valves is not new in the industries. All the technicians have suitable equipment in place to perform efficiently. So, when it comes to picking the most suitable device, you must consider the right size and type. Properly matched valve size is highly prominent, and it means that you have a valve size that is matching to the expected flow of liquids through the pipes. You should also consider a valve’s vital functions to adjust the flow, prevent backflow, shut off the flow, etc.

Consider material type

It is undoubtedly true that valves made from high-quality materials are good to use. But, it is important to choose one as per the type of material that is flowing through the system. You should ensure the type of liquid, whether it is clean or corrosive. It is also important to check if the liquid is acidic. The valves are mainly available with plastic and metals. So, you must ask the supplier about the most-suited valve as per the type of liquid.

Performance measures

Performance is an important factor to consider when it comes to choosing the best flow control valves. The performance of these devices is mainly computed based on pressure and temperature. So, while selecting the devices, you must check the temperature and pressure ranges. Metal valves are more likely to withstand higher temperatures and pressure as compared to plastic valves. So, keep this point into consideration while choosing the best flow controlling mechanism.

Flow direction

It is highly important to check the flow direction while selecting the valve. Some valves work well when installed vertically, and some work well when installed horizontally. So, it is vital to ensure that you have selected the valve that has the right working system as per the flow direction. It is crucial that the valve could shut the flow correctly to prevent leakage, and it could also work well to open properly for resuming the flow inside the pipes.

Consider ongoing maintenance

You should check if there is a greater need for ongoing maintenance of the valve for accurate working. Give attention to the degree of maintenance requirements to ensure better working. Some valves, like ball valves, are resistant to malfunctioning and jamming. But, do not much suitable to adjust the flow as it can lead to leakage of fluids.

Cost

However, the cost is not important than the performance of flow control valves. But, if there is not much requirement for high performance, then you can consider the cost of the valve. You can think about a valve that has a normal price range to fit the controlling functions.

The Final Say

These are 6 important factors to consider for choosing the best flow control valves. I hope this post helped you a lot to get insight into choosing the suitable valves. Consult Proteus industries for more information regarding flow control devices.

LEAVE A REPLY

Please enter your comment!
Please enter your name here